The Cordell & Co. Mountaineer Rucksack

The Cordell & Co. Mountaineer Rucksack


The Mountaineer - Cordell & Co.

This is one we've been wanting to do for a long time, and it's finally ready. The mountaineer is a large 30 Litre rucksack with an integrated aluminum frame, full leather bottom, padded straps, and a lower back pad. It was inspired by the all-time favourite vintage pack from our collection, a Swiss army classic from 1945. Redesigned and built to our perfectionist standards, this is the heavy-duty model for serious adventures!

 

Construction and Materials:

As with all of our products this pack is made entirely from traditional materials. The fabric is a Heavy-weight 18oz cotton canvas, pictured here in dark olive green. This pack has a full leather bottom, made from 5 oz veg-tan and stitched together with a super heavy bonded nylon thread. The leather bottom gives the bag a very luxurious look and feel, and provides far superior abrasion resistance versus an all canvas model.

The straps and trim on the mountaineer are made from the same type of veg-tan leather in a super-heavy weight. We love the natural finish because it develops a beautiful brown patina over time, and like all veg-tan it will soften and break in as you use it. Hardware on this bag is solid brass as always, this version with matte finish and nickel plated.

Lastly we used a high-grade wool felt for the padding of the shoulder straps and lumbar pad. Natural wool has some great properties that made it an ideal choice for this application: it insulates against both heat and cold, it is durable, cannot rip, tear or fray, and doesn't feel wet when it is wet.  Leather and foam can be very hot and is uncomfortable when wet, and fabric/foam can become soaked also, so we are confident that wool is the best all-around choice when compared with other methods of padding.

 

The Frame system:

 

A large pack needs a frame! We feel that other manufacturers of traditional gear have been dropping the ball on this. All vintage packs of a large size typically had a frame, be it steel or aluminum, and all modern hiking packs (the good ones) will have a rigid back padded with foam. This is essential for the bag to hold its shape and remain comfortable when packed in different ways. Many modern canvas and leather bag makers seem to think that they could do without but we couldn't agree less! The mountaineer uses a simple aluminum frame system: Two thin aluminum slats run along the back of the bag, which is padded on the inside with wool felt and are retained by simple snaps on the top. The slats can flex if need be and the lumbar pad keeps the metal away from your back. If for some reason you would rather go without the frame, simply unsnap the top retainers and slide them out in seconds. 

 

 

The Drawstring:

The way we do drawstrings on our packs may throw some people off so I'll explain it here. A round, drawstring closure bag is far superior to a square one if made correctly. The rope takes the weight from the front panel and transfers it up into the shoulder straps. The bag is supported all the way around and strain is distributed evenly. The rope should be tied the exact same way you would tie your shoelaces, we don't use any type of slide because although they are faster to close they are not strong at all. On the Mountaineer the rope passes through the back of the pack and forms two loops which are then led into the shoulder straps. The original Swiss design did something similar but we've done it in a much cleaner, simpler, and attractive way. Always be sure to tie your drawstring firmly! It is part of the load-bearing design. 

 

Use and Versatility:

 

This pack is intended as a large capacity pack for multi day trips. It is ideal for backpackers, campers, bushcrafters, and serious adventurers. It is built very heavy-duty and we would not generally recommend it for daily use like work or school simply because of the size, although you are free to determine that for yourself! The padded straps in combination with the lower back pad make for a very comfortable setup that can be worn all day. There are loops to attach a wait belt. You can use your own belt but we will also sell these separately. The large outer cargo pockets are very useful and can hold a lot of gear. These are good for items you will want to access more frequently as they are the easiest to open. The bag does not have small interior organizer pockets, rather it has snap fittings where you can attach an optional organizer sleeve that will be available in the near future. 

 

 

Additionally, we have put attachment points on the front and bottom of the pack allowing you to attach gear externally. The main attachment point (between the front buckles) can accommodate a strap vertically or horizontally, this is great for hanging a canteen, axe or shovel. Loops on the bottom of the pack are perfect for attaching a sleeping roll or blanket.

 

 

Summary:

 

A truly all-out design with nothing spared. It's loaded with high-end features and thoughtful details, from the striking leather bottom to the heavy-duty padded straps. This is a pack with undeniable style, made by hand with detail and precision. Yes, we know they're expensive, but when you get to handle one in person you won't ask why. These are made to serve you for a lifetime and backed up with the warranty to suit. The Mountaineer will be available for pre-order Monday November 2nd, 2026.

 

Cordell Drohomereski

 

 

Back to blog

Leave a comment